API
def swipe(self, start_x, start_y, end_x, end_y, duration=None):
"""Swipe from one point to another point, for an optional duration.
:Args:
- start_x - x-coordinate at which to start
- start_y - y-coordinate at which to start
- end_x - x-coordinate at which to stop
- end_y - y-coordinate at which to stop
- duration - (optional) time to take the swipe, in ms.
:Usage:
driver.swipe(100, 100, 100, 400)
"""
# `swipe` is something like press-wait-move_to-release, which the server
# will translate into the correct action
action = TouchAction(self)
action \
.press(x=start_x, y=start_y) \
.wait(ms=duration) \
.move_to(x=end_x, y=end_y) \
.release()
action.perform()
return self
- start_x - 滑动开始x轴坐标
- start_y - 滑动开始y轴坐标
- end_x - 滑动结束x轴偏移量
- end_y - 滑动结束y轴偏移量
- duration - (可选) 执行此次滑动时间，单位毫秒.
其中end_x和 end_y 为基于start_x和start_y的偏移量。最终在执行中的 to_x = start_x+end_x 并非end_x
duration 参数单位为ms（默认5毫秒） 注意1s =1000ms
示例：
获取屏幕尺寸
def GetPageSize(self):
x = self.driver.get_window_size()['width']
y = self.driver.get_window_size()['height']
return (x, y)
左滑
技巧：左滑是从较大x值 --->较小x值，所以 to_x=sx+(-ex)
技巧：左滑时y轴值基本无变化，所以ey=0
-
技巧：sx的值一定大于屏幕尺寸的53%，否则虽向左滑动但不能生效切换页面
def swipe_left(self): s = self.GetPageSize() sx = s[0] * 0.57 sy = s[1] * 0.75 ex = s[0] * 0.55 ey = 0 self.driver.swipe(sx, sy, -ex, ey, dt)
右滑
-
技巧：sx的值一定不能大于屏幕尺寸的 46%，否则虽然向右滑动但不能生效切换页面
def swipe_right(self): s = self.GetPageSize() sx = s[0] * 0.43 sy = s[1] * 0.75 ex = s[0] * 0.54 ey = 0 self.driver.swipe(sx, sy, ex, ey, dt)
上滑 （俗称上拉加载更多）
技巧：上滑是从较大y值--->较小y值，所以to_y=sy+(-ey)
技巧：上滑时x轴值基本无变化，所以ex = 0
-
技巧：sx的值可s[0]范围内随意，sy和ey 需在 s[1]0.2 -- s[1]-s[1]0.4 之间取值，
因为需要考虑：状态条、导航栏、底部功能栏等所占数值def swipe_up(self): s = self.GetPageSize() sx = s[0] * 0.43 sy = s[1] * 0.45 ex = 0 ey = s[1] * 0.55 self.driver.swipe(sx, sy, ex, -ey, dt）
下滑（俗称下拉刷新）
-
技巧：sx的值可s[0]范围内随意，sy和ey 需在 s[1]*0.2 -- s[1]-s[1]*0.4 之间取值，
因为需要考虑：状态条、导航栏、底部功能栏等所占数值def swipe_down(self): s = self.GetPageSize() sx = s[0] * 0.35 sy = s[1] * 0.45 ex = 0 ey = s[1] * 0.55 self.driver.swipe(sx, sy, ex, ey, dt)
其中如有错误，欢迎指正 讨论QQ群：658703911
