- Spark Streaming程序的运行，不断的产生job，不断的生成RDD、不断的接收数据存储数据，不断的保存元数据等，如果不清理这些数据，内存和磁盘空间都会崩溃，看一下Spark Streaming是如何做清理工作的
- Spark Streaming在Job运行完成时会触发数据清理动作，看JobHandler中run()方法的代码
def run() {
try {
val formattedTime = UIUtils.formatBatchTime(job.time.milliseconds, ssc.graph.batchDuration.milliseconds, showYYYYMMSS = false)
val batchUrl = s"/streaming/batch/?id=${job.time.milliseconds}"
val batchLinkText = s"[output operation ${job.outputOpId}, batch time ${formattedTime}]"
ssc.sc.setJobDescription(
s"""Streaming job from <a href="$batchUrl">$batchLinkText</a>""")
ssc.sc.setLocalProperty(BATCH_TIME_PROPERTY_KEY, job.time.milliseconds.toString)
ssc.sc.setLocalProperty(OUTPUT_OP_ID_PROPERTY_KEY, job.outputOpId.toString)
// We need to assign `eventLoop` to a temp variable. Otherwise, because
// `JobScheduler.stop(false)` may set `eventLoop` to null when this method is running, then
// it's possible that when `post` is called, `eventLoop` happens to null.
var _eventLoop = eventLoop
if (_eventLoop != null) {
_eventLoop.post(JobStarted(job, clock.getTimeMillis()))
// Disable checks for existing output directories in jobs launched by the streaming
// scheduler, since we may need to write output to an existing directory during checkpoint
// recovery; see SPARK-4835 for more details.
PairRDDFunctions.disableOutputSpecValidation.withValue(true) {
// run方法中包含了job的提交函数，触发sparkContext.runJob,真正的提交job
job.run()
}
_eventLoop = eventLoop
if (_eventLoop != null) {
_eventLoop.post(JobCompleted(job, clock.getTimeMillis()))
}
} else {
// JobScheduler has been stopped.
}
} finally {
ssc.sc.setLocalProperty(JobScheduler.BATCH_TIME_PROPERTY_KEY, null)
ssc.sc.setLocalProperty(JobScheduler.OUTPUT_OP_ID_PROPERTY_KEY, null)
}
}
job.run执行之后，job运行完成。发送一个JobCompleted消息给事件循环器，事件循环器调用handleJobCompletion()方法，代码如下
private def handleJobCompletion(job: Job, completedTime: Long) {
val jobSet = jobSets.get(job.time)
jobSet.handleJobCompletion(job)
job.setEndTime(completedTime)
listenerBus.post(StreamingListenerOutputOperationCompleted(job.toOutputOperationInfo))
logInfo("Finished job " + job.id + " from job set of time " + jobSet.time)
if (jobSet.hasCompleted) {
jobSets.remove(jobSet.time)
jobGenerator.onBatchCompletion(jobSet.time)
logInfo("Total delay: %.3f s for time %s (execution: %.3f s)".format(
jobSet.totalDelay / 1000.0, jobSet.time.toString,
jobSet.processingDelay / 1000.0
))
listenerBus.post(StreamingListenerBatchCompleted(jobSet.toBatchInfo))
}
job.result match {
case Failure(e) =>
reportError("Error running job " + job, e)
case _ =>
}
}
- 这里判断了jobSet是否完成，如果完成调用jobGenerator的onBatchCompletion方法，代码如下
jobGenerator.onBatchCompletion(jobSet.time)
onBachCompletion的代码如下
def onBatchCompletion(time: Time) {
eventLoop.post(ClearMetadata(time))
}
然后发送一个ClearMetadata消息，看他的ClearMetadata的处理方法，代码如下
private def clearMetadata(time: Time) {
ssc.graph.clearMetadata(time)
// If checkpointing is enabled, then checkpoint,
// else mark batch to be fully processed
if (shouldCheckpoint) {
eventLoop.post(DoCheckpoint(time, clearCheckpointDataLater = true))
} else {
// If checkpointing is not enabled, then delete metadata information about
// received blocks (block data not saved in any case). Otherwise, wait for
// checkpointing of this batch to complete.
val maxRememberDuration = graph.getMaxInputStreamRememberDuration()
jobScheduler.receiverTracker.cleanupOldBlocksAndBatches(time - maxRememberDuration)
jobScheduler.inputInfoTracker.cleanup(time - maxRememberDuration)
markBatchFullyProcessed(time)
}
}
- 这里调用了DStreamGreph的clearMetadata()方法，代码如下
def clearMetadata(time: Time) {
logDebug("Clearing metadata for time " + time)
this.synchronized {
outputStreams.foreach(_.clearMetadata(time))
}
logDebug("Cleared old metadata for time " + time)
}
分别调用每一个outputStream的clearMetadata(time)方法，代码如下
private[streaming] def clearMetadata(time: Time) {
val unpersistData = ssc.conf.getBoolean("spark.streaming.unpersist", true)
val oldRDDs = generatedRDDs.filter(_._1 <= (time - rememberDuration))
logDebug("Clearing references to old RDDs: [" +
oldRDDs.map(x => s"${x._1} -> ${x._2.id}").mkString(", ") + "]")
generatedRDDs --= oldRDDs.keys
if (unpersistData) {
logDebug("Unpersisting old RDDs: " + oldRDDs.values.map(_.id).mkString(", "))
oldRDDs.values.foreach { rdd =>
rdd.unpersist(false)
// Explicitly remove blocks of BlockRDD
rdd match {
case b: BlockRDD[_] =>
logInfo("Removing blocks of RDD " + b + " of time " + time)
b.removeBlocks()
case _ =>
}
}
}
logDebug("Cleared " + oldRDDs.size + " RDDs that were older than " +
(time - rememberDuration) + ": " + oldRDDs.keys.mkString(", "))
dependencies.foreach(_.clearMetadata(time))
}
- 第一步从generatedRDDs中过滤出不用的oldRDDs ，过滤的依据是当前batch的时间-rememberDuration，rememberDuration很关键，一般是batch的倍数，如果有windows操作，他会加上windowsDuration,最终结果就是保证还需要被使用的RDD不被清理。
第二步从内存数据结构generatedRDDs中删除oldRDDs
第三步判断是否清理RDD的持久化数据，默认是清理，调用rdd的unpersist方法清理缓存数据。如果是BlockRDD，调用BlockRDD的removeBlocks()方法，从BlockManager中清除BlockRDD接收的数据
第四步清理依赖关系
