In order to enable the ability to assign user-defined names to USB network interfaces, we need to have /etc/udev/rules.d/80-net-setup-link.rules, as this is the rule set 73-usb-net-by-mac.rules checks against before assigning NAME.
This means that simply linking from /etc/udev/rules.d/80-net-setup-link.rules to /lib/udev/rules.d/80-net-setup-link.rules is needed in order to avoid that user-assigned network interface names get ignored any longer.
sudo ln -s /lib/udev/rules.d/80-net-setup-link.rules /etc/udev/rules.d/80-net-setup-link.rules
Reboot. Done.
执行如下命令：
sudo ln -s /lib/udev/rules.d/80-net-setup-link.rules /etc/udev/rules.d/80-net-setup-link.rules
然后修改/etc/udev/rules.d/80-net-setup-link.rules：
sudo nano /etc/udev/rules.d/80-net-setup-link.rules
在底部插入这两行。其中把ATTR改成对应网卡mac，mac可以用ifconfig看，NAME改对应的名字即可
# wlan0
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="AA:BB:CC:DD:EE:FF", KERNEL=="wlan*", NAME="wlan0"
# wlan1
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:11:22:33:44:55", KERNEL=="wlan*", NAME="wlan1"
