@page { margin: 2cm } p { margin-bottom: 0.21cm }
$mkdir sq1612
$cd sq1612/
1.Serial port
$ls -l /dev/ttyUSB0
$sudo apt-get install minicom
(sudodpkg -i ...)
$sudo minicom -s
Serialport setup
A- Serial Device : /dev/ttyUSB0
F- Hardware Flow Control : No
Savesetup as dfl
Exitfrom Minicom
$minicom
$ls -l /dev/ttyUSB0
$sudo chmod 666 /dev/ttyUSB0
$ls -l /dev/ttyUSB0
$minicom
1.CTRL-A 2. Z 3. x 4. Enter
2.Update OS
(1)Connect USB to Host and Target(board)
(2)Switch to NOR, power up
(3)
$cd ForStudent/MiniTools-20130513/
$chmod u+x *
$sudo ./start.sh
(Vmwareuser: USB mode set to 3.0)
(4)
(5)Switch to S2 and restarttarget.
[root@FriendlyARM/]#
(6)test board in serial port.
mini2440
用户手册
P112 Chapter 2.6
GUI:chapter 2.5
2.2
使用
MiniTools
快速刷系统
updatewinCE OS
chapter2.7
2.4
非操作系统下的外围资源测试
Finally,update board to Linux OS.
$ls -l /dev/ttyUSB0
$sudo chmod 666 /dev/ttyUSB0
$minicom
