keepalived

在架构分布式时常常使用nginx去做负载均衡，当其他服务挂掉的时候nginx可以把请求转向其它活着的服务。保证服务的稳定。可是如果nginx挂了呢？那岂不是糟了？这时候我们就需要keepalived来帮我们实现高可靠。
一般有两个或两个以上的节点，且分为活动节点及备用节点。部署在2台服务器上，分为一主一备。Keepalived可以对本机上的进程进行检测，一旦Master检测出某个进程出现问题，将自己切换成Backup状态，然后通知另外一个节点切换成Master状态。（不停的查进程，然后抢ip）

1.配置keepalived虚拟IP

修改配置文件： /etc/keepalived/keepalived.conf

#MASTER节点
global_defs {
}
vrrp_instance VI_1 {
    state MASTER   #指定A节点为主节点 备用节点上设置为BACKUP即可
    interface eth0    #绑定虚拟IP的网络接口
    virtual_router_id 51   #VRRP组名，两个节点的设置必须一样，以指明各个节点属于同一VRRP组
    priority 100   #主节点的优先级（1-254之间），备用节点必须比主节点优先级低
    advert_int 1  #组播信息发送间隔，两个节点设置必须一样
    authentication {    #设置验证信息，两个节点必须一致
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {    #指定虚拟IP, 两个节点设置必须一样
        192.168.33.60/24    #如果两个nginx的ip分别是192.168.33.61,,...62，则此处的虚拟ip跟它俩同一个网段即可
    }
}
#BACKUP节点
global_defs {
}
vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 51
    priority 99
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.33.60/24
    }
}

分别启动两台机器上的keepalived
service keepalived start
测试：
杀掉master上的keepalived进程，你会发现，在slave机器上的eth0网卡多了一个ip地址
查看ip地址的命令： ip addr

2.配置keepalived心跳检查

原理：
Keepalived并不跟nginx耦合，它俩完全不是一家人
但是keepalived提供一个机制：让用户自定义一个shell脚本去检测用户自己的程序，返回状态给keepalived就可以了

#MASTER节点
global_defs {
}

vrrp_script chk_health {
    script "[[ `ps -ef | grep nginx | grep -v grep | wc -l` -ge 2 ]] && exit 0 || exit 1"
    interval 1    #每隔1秒执行上述的脚本，去检查用户的程序ngnix
    weight -2
}

vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 1
    priority 100
    advert_int 2
    authentication {
        auth_type PASS
        auth_pass 1111
    }

    track_script {
        chk_health
    }

    virtual_ipaddress {
        10.0.0.10/24
    }

    notify_master "/usr/local/keepalived/sbin/notify.sh master"
    notify_backup "/usr/local/keepalived/sbin/notify.sh backup"
    notify_fault "/usr/local/keepalived/sbin/notify.sh fault"
}

#添加切换通知脚本
vi /usr/local/keepalived/sbin/notify.sh
#!/bin/bash

case "$1" in
    master)
        /usr/local/nginx/sbin/nginx
        exit 0
    ;;
backup)
        /usr/local/nginx/sbin/nginx -s stop
        /usr/local/nginx/sbin/nginx
        exit 0
    ;;
    fault)
        /usr/local/nginx/sbin/nginx -s stop
        exit 0
    ;;
    *)
        echo 'Usage: notify.sh {master|backup|fault}'
        exit 1
    ;;
esac

#添加执行权限
chmod +x /usr/local/keepalived/sbin/notify.sh
global_defs {
}

vrrp_script chk_health {
    script "[[ `ps -ef | grep nginx | grep -v grep | wc -l` -ge 2 ]] && exit 0 || exit 1"
    interval 1
    weight -2
}

vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 1
    priority 99
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }

    track_script {
        chk_health
    }

    virtual_ipaddress {
        10.0.0.10/24
    }
    
    notify_master "/usr/local/keepalived/sbin/notify.sh master"
    notify_backup "/usr/local/keepalived/sbin/notify.sh backup"
    notify_fault "/usr/local/keepalived/sbin/notify.sh fault"
}

#在第二台机器上添加notify.sh脚本
#分别在两台机器上启动keepalived
service keepalived start 
chkconfig keepalived on

最后编辑于：2019.07.05 14:48:19